Dingo Wheeled Models

Product Details

• 23 hp Kohler® engine
• 4-Paw® Independent 4-Wheel Drive
• 2-Pump System
• 2 Ground Speeds
• 2-Fuel Tanks
• Adjustable Thigh Support

 

• Productive, no matter how you look at it.
• Supporting more than 35 attachments.
  
• Ride-on platform provides improved visibility.
  
• At only 40.5" wide, access confined spaces you never dreamed possible.
• Removable counterweight: add lift capacity or increase down pressure for optimal attachment performance.
• Short length results in efficient trailering.

Dingo Tracked Models

• Dingo 323 (22318)
• Dingo 317 (22317)
  

(All specifications are for Dingo 328 (22318). Specs for each model of the Dingo Wheeled models may vary. For specific product details, features, accessories, or specifications of the Dingo Wheeled series, contact us)

Features

2 Ground Speeds
Operator can select low or high speed ground speed. Low speed directs more hydraulic power to the attachment and high speed directs more power to the wheels. The low speed option also helps new operators shorten their learning curve.

4-Paw Independent 4-Wheel Drive
Directs hydraulic flow and pressure to all the wheels, at all times. You can power through the toughest conditions and reduce the likelihood of getting stuck. The 4-Paw®eliminates the use of chains - reducing maintenance and eliminating the chance of a broken chain.

Compact Size & Maneuverability
Get the Dingo into tight spaces where only hand labor could go before. Add to the easy spin steer turning, and you'll be able to power through the toughest jobs. This means landscape contractors can use the incredible power of the Dingo to save time and money on labor.

Fingertip Controls
Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips.

Durable Hood
Durable, flexible resin hood protects your engine from damage and keeps dirt and debris out of the engine compartment. Your machine will run longer with less downtime.

Hydraulic Power
Up to 10.8 gpm at 3000 psi hydraulic system gives you incredible hydraulic power to auger up to 30" holes or trench 36" deep.

2-Pump Hydraulic System
Independent power can be supplied to the attachment or the wheels. The 2-pump system offers a high flow of 10.8 gpm and a low flow of 4 gpm. This provides better use of power to get the job done as well as not relying on one pump for shared power!

Quick Attach System
Each attachment is equipped with Toro's unique quick-attach system. The Dingo quick-attach system makes changing attachments as simple as turning 2 levers. Each attachment is designed to be installed in less than 1 minute. (One exception - the backhoe takes 2 minutes.)

Extended Run Times
Two durable, 4-gallon gas tanks provide fuel for a full day of hard work.

(All specifications are for Dingo 328 (22318). Specs for each model of the Dingo Wheeled models may vary. For specific product details, features, accessories, or specifications of the Dingo Wheeled series, contact us)

Accessories

Sun Shade
Blocks the sun while providing the operator with clear 360 visibility. For use with the Toro Dingo backhoe attachment.

Snow Cab
The clear plastic shield allows for 360 visibility while keeping the operator warm and dry in the toughest winter conditions.

Dingo Wheeled Models

(All specifications are for Dingo 328 (22318). Specs for each model of the Dingo Wheeled models may vary. For specific product details, features, accessories, or specifications of the Dingo Wheeled series, contact us)

Engine 23hp	Kohler® Command PRO™
Cooling System	Air cooled
Ground Speed	0-3mph forward/ reverse
Hydraulic System: Pressure	3000 psi relief
High Flow Pump	10.8 gpm
Low Flow Pump	4 gpm
Hydraulic Reservior Cap.	14.8 gallons (56 L)
Controls	Key, throttle, choke
Steering	Zero turn type w/ 2 controls
Loader/Hydraulic System	2 control levers- push/pull
Ground Clearance	5" (13cm) front & rear
Overall Length	62" (157.5cm); 82.8" w/ bucket
Overall Width	40.5" (109.9cm) std tires
Overall Height	48.7" (123.7cm)
Hinge Pin Height	66" (167.6cm) std. bucket
Tip Capacity (max lift)	1030lb. w/ 200lb operator
Rated Operating Capacity	515lb. w/ 200lb operator
Weight (w/o bucket)	1522 lb.
Weight (w/ std. bucket)	1668 lb.
Engine Warranty	Two Year
Product Warranty	One Year